|
|
|
|
|
|
2008 Hayabusa Drag Race Bare Necessities Kit
|
Sale Price: $399.00
|
|
|
2008 Hayabusa drag race bare necessities kit to extract the quickest E.T. and highest MPH from Suzukis most powerful machine ever. This is the kit used by the racer who wants the highest quality and the best looking components available for their new killer.
The 2008 Busa Drag Race Bare Necessities Kit contains the following clutch and suspension components:
• S13-CM-ULTRA: Brocks legendary ultra light clutch mod for quicker engine acceleration and smooth launches. Replaces the stock back-torque limiter. Hard anodized clutch spring spacers included. (Note: lever pressure increased @10%)
• BPP-RMFELK: Brocks radial mount front end lowering kit includes black anodized/laser etched radial mount strap bracket kit. Billet strap end kit to prevent obstruction of travel and/or damage to the radiator from the strap buckle and Brock’s longer strap to accommodate the end kit.
• S13-LL-SET: Brocks black anodized/laser etched 3 position adjustable lowering link set to lower the rear of the bike to match the front and look GREAT doing it! (Note: side stand may need to be shortened or replaced with an adjustable unit depending upon which position is used)
|
|
|
|
|
|
|
|
|
|
|
|
|
Bazzaz performance gear - Tuning, Traction Control, Sensors and Switches
|
|
Sale Price: $690.00
|
|
|
All sorts of Bazzaz kit.
let's look at the Z-F1 performance fuel injector controller kit.
The Bazzaz Performance Z-Fi Fuel Control Unit differs significantly
from what is currently available in the marketplace in a number of
ways.
Bazzaz Performance has developed an in-line unit that
precisely controls fuel delivery to optimize engine performance. It is
a plug and play unit that piggy-backs onto the stock ECU. Each unit
comes with an application specific harness that utilizes OEM connectors
for simple installation, and comes pre-programmed for either the stock
exhaust or a slip-on.
The Z-Fi also features a USB interface
with easy to use software, allowing tuning modifications by the end
user. The Z-Fi is the first piggyback system on the market that can run
up to 8 injectors independently. This translates into ease of tuning
and significantly better performance on applications that utilize 8
injectors like the Suzuki GSXR1000 and the Honda CBR600RR. The Z-Fi can
be run and/or tuned using the closed-loop self mapping feature with the
purchase of the optional Z-AFM kit.
• Supplied with application specific harness for easy Plug and Play installation
• Pre-programmed with 2 maps, one for stock and one for a slip-on exhaust
• Comes with easy to use software and USB cable making tuning a snap
• Self mapping capability with purchase of optional Z-AFM Kit
• Runs up to 8 injectors independently
• Features gear dependent fuel trims
• Stores two maps, Switchable “On the Fly”
Now for thr Z-Fi QS Quick shift system
The Z-Fi QS (Quick Shift) integrates the all the same features of the
Z-Fi controller with an updated version of the popular Bazzaz
Performance QS-4 Quick Shift all in one unit.
Customer
feedback on the QS-4 led Bazzaz Performance to develop a new shift
sensor for improved reliability, which now also includes an application
specific adapter rod for ease of installation.
The Z-Fi QS
unit employs race proven “QCK” technology for seamless clutch-less up
shifting. It has user adjustable gear dependant kill times allowing for
optimal shifting in all gears. The kit comes complete with control
unit, harnessing, shift switch, and adapter rod.
• All the same features of the Z-Fi
• Allows for full power clutchless up-shifting for faster lap times
• Rugged shift sensor with application specific adapter rods for
easy installation
• Gear Dependant kill times for optimal shifting in all gears
Ask me, we have all their stuff available. Handle bar switches, oxygen sensor units, you name it. We have these for 08 Busas too. Even better traction control units. (yes, the 08 has traction control).
|
|
|
|
|
|
|
|
|
|
|
|
|
Gilles Tooling Axle Safety Nut
|
|
Sale Price: $210.00
|
|
|
Ever had doubts about the axle nut? I have. So much so that I made my own years ago. Funnily, it is pretty much like the GT unit. The only difference is that I didn't have a chunk of titanium hanging around. Gilles do and they did. Made from TI6ALVA Titanium and it is lightweight (only 20 grams). I think they made a better one then me. By about ten miles. The Gilles safety nut features an innovative pin-interlock offering high self-locking characteristics. Nice.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gilles Tooling Chain Adjusters
|
|
Sale Price: $396.00
|
|
|
The Chain adjusters are a nice direct replacement part for the factory fiasco. They are accurately cut and shaped, and are extremely lightweight. Construction is high quality aluminum. There are five colours to choose from, all hard anodised. So, what do they do? The provide quick and convenient chain adjustment and exact adjustment by adjusting bolt from the rear, not from inside that infuriating cavity. There is also a swish axle safety nut also available in titanium. It is clearly visible in each of the pics.
If you look carefully, you will also see the lifter. These are also available in the same hard anodized finishes.
|
|
|
|
|
|
|
|
|
|
|
|
|
GPR stabilizer
|
|
Sale Price: $899.00
|
|
|
The GPRV4, specifically made for sport / road racing bikes. We've taken our proven fluid control technology and squeezed, trimmed, and lightened this model up to be exactly what the racers want. Smaller, lighter, faster.
A large dial with a definite "no-slip" grip that locks into place with a positive "click" at 20 settings. Approximately 30% lighter than the GPR original Version 1. Available now in Black / Red and multiple color combinations in the fall of 2007. Developed extensively in the World Superbike paddock and the AMA Roadracing paddock during the 2007 with incredible results. Shorter fluid ports, new valving, quicker reacting to high speeds.
Two wheel tuners "Brappy" award for "Best Road Racing Product of 2007". "Massive improvement over the original model" Superbike Magazine 2007.
|
|
|
|
|
|
|
|
|
|
|
|
|
Harris Performance Swingarm Spools
|
|
Sale Price: $65.00
|
|
|
Haven't got spools? These will fill that void. Good looking suckers too.
|
|
|
|
|
|
|
|
|
|
|
|
|
Long Adjustable Kickstand
|
|
Sale Price: $285.00
|
|
|
This is just a longer version of the shortie. Extends out to the OEM length for those that go up and down.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lowering Links
|
|
Sale Price: $159.00
|
|
|
These will do the job and they wouldn't be here if they didn't. 6061 T-6 aluminum and have proven to crack or break. For that reason, these are manufactured from 7075 T-6 Billet aluminum.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ohlins Road & Track Fork kit
|
|
Sale Price: $5,700.00
|
|
|
Doing
some work on the suspension? Significantly improce the performance down
there in one go with TC. All bolt-on fork kits feature 43mm upside-down
forks with inner steel legs and polished titanium nitride surfaces for
minimal friction. Of course, there is fully adjustable rebound,
compression damping and spring preload; all adjustments can be made
externally. Thats a good thing for a change. No lying under there to
get it sorted.
All
kits include all necessary hardware and instructions for installation
with the exception of wheel sleeves, spacers and fender mounts.
Available to fit Brembo calipers with 100mm c.c. bolt holes. * Designed
with an offset of 13.3mm from center of fork tube to center of caliper
mounting bolts to achieve correct brake disc position.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ohlins shock
|
|
Sale Price: $2,275.00
|
|
|
All Öhlins shock absorbers are developed from the knowledge and experience of top factory race teams around the world. There is a good reason for this, superior construction, superior materials and superior engineering skills give you the best-quality shock on the market. Shock body is precision-drawn steel with aluminum shock reservoir; race shocks feature lightweight, high-strength aluminum shock bodies.
Stainless steel braided PTFE hose used with all remote reservoir shocks.
Springs are chrome silicone. All aspects of basic shock setup and performance are thoroughly tested to ensure that each shock absorber performs flawlessly. Öhlins shock absorbers are 100% rebuildable so you get lasting quality – you can readjust, reshim and overhaul the shock absorber for years of peak performance.
|
|
|
|
|
|
|
