|
1300 Billet Shift Shaft Set 99-08
Sale Price: $175.00
|
|
|
|
These specially designed shift fork shafts are constructed and heat-treated to allow the shafts to flex as opposed to bending under adverse conditions. After bending they return to their original straightened position, which prevents the shift fork from rubbing in the slot which also increases shift fork and gear longevity. Threaded holes in end of shaft for easy removal.
|
|
|
1397 KIT
Sale Price: $7,500.00
|
|
|
The 1397 kit. Everyone wants one but never seem to get the right goodies. Well, look no further. TC will supply you with all the goodies to get it right first go. 1397 with the best bits at a great price.
Cylinder head must be sent in for porting and the cylinder block must be sent for exchange.
|
|
|
|
Air Box Lid
Sale Price: $135.00
|
|
|
Remove your stock or aftermarket air cleaner for max power and MPH at the drag strip
(ONLY!) without having to worry about air box pressure leaks or flow disturbances caused by using a
modified stock filter.
I will say it again, not a street piece. That engine needs to have a filter.
|
|
|
|
Baffle, Oil Pan (99-07)
Sale Price: $190.00
|
|
|
|
Our Oil Pan Baffle System is constructed of light weight aluminum, cut and folded into shape. It bolts into place in the bottom end of your Hayabusa.
|
|
|
|
Carrillo Rods
Sale Price: $1,850.00
|
|
|
The Carrillo Rod is a precision, high strength, quality, H-Beam connecting rod.
Fatigue is the major cause of connecting rod failure.
Carrillo Industries uses proprietary steel, manufactured and forged to their own custom specifications. After experimenting with virtually every other reasonable material, they have found this chromium / nickel / vanadium / molybdenum FORGED alloy to be the best product to meet their stringent requirements for strength and durability.
In summary, good stuff.
|
|
|
|
CNC Ported Head - Hayabusa (99-07)
Sale Price: $2,215.00
|
|
|
We will CNC Port
your Cylinder head to our specifications.
Send the head
to us completely assembled and we will return it ready for you to install on
your engine!
|
|
|
|
CNC Ported Head- Street Chaos
Sale Price: $3,219.00
|
|
|
The "STREET CHAOS" CNC-B Cylinder Head is for use with 1500 PLUS CC's **ONLY**Hayabusa
Ported Cylinder Head (all years) Brock's Performance will CNC Port your
Cylinder head to our specifications. Send the head to us completely
assembled and we will return it ready for you to install on your engine!
|
|
|
|
EK Drag Chains
Our Price:
|
|
|
The big boys. Wow.
We have three types for your application.
630MS: Tough Enough for up to 500hp
The
630MS was specially designed for the “lighter” drag bike. It’s
quad-staked, has a tensile strength of 11,880 lbs. and is rated for
bikes up to 500hp. The pin diameter is .233", the side plates are .121"
on the inside, outside and master.
Recommended application: drag racing up to 500hp
Tensile strength: 11,880 lbs.
Available lengths: 110, 120, 130, 140, 150
530DRZ2: The Pro Stock Racer’s Choice
The EK 530DRZ is chosen by more top NHRA Pro Stock Bike competitors
than any other chain. The reason is simple: When a championship is on
the line, you can’t afford a failure. In 2004, Sam Wheeler used the
530DRZ in recording the fastest-ever terminal speed for a two-wheel
vehicle: 338.269mph!
Recommended application: drag racing up to 300hp
Tensile strength: 11,500 lbs.
Available lengths: up to 160 links
You can use the DR on the street but the other two, nope, don't do it.
I will contact you to discuss your requirements. When you are going hard like that, I would rather have a short conversation with you about it.
|
|
|
|
Evo Shift star kits
Sale Price: $370.00
|
|
|
Nothing simple about designing this copyrighted design kit at all.
Oodles and oodles of different STAR arcs, angles, radii, major and minor diameters were tried on multiple bikes to get the best feeling, best performing design for each bike.
The EVO STAR kit does the impossible - it makes shifting quicker, virtually eliminates missed shifts, removes clunkiness AND is easier and more reliable to shift than stock.
Fixes notchy and lazy shifting. Hayabusa's stop shifting like a truck and now shift like a dream on street and track, with or without the clutch - at 2nd gear, in-town "cruise" and when "bangin' downshifts" into that 160 to 20 mph corner or "trying for that last 10th, "bang into second" shift at the drags........
|
|
|
|
Exhaust Cam EX031-Hayabusa (99-07) - Drop In
Sale Price: $880.00
|
|
|
|
Custom Grind Billet Exhaust Cam. No core required. MAX performance with stock engine. .348Lift/260 Duration-235Deg@.050 "Drop-In" use for stock engines (Cam must be degreed! We provide specifications.) Also offers excellent performance when used with our Top End Kit where superior average power and drivability are desired. All Brock's Performance camshafts feature hard weld lobes on new O.E.M. Suzuki cores. We hold the base circle diameter as close to stock dimensions as possible, the result is far less shim hassles for you!
|
|
|
